How do you add oil to the axle of ezgo txt golf cart electric?

To add oil to the axle of an EZGO TXT golf cart electric, follow these steps:

1. Make sure the golf cart is parked on a level surface and the key is turned off.
2. Locate the axle on the rear of the golf cart.
3. Find the fill plug on the axle housing. It is typically located on the top or side of the axle.
4. Use a wrench or socket to remove the fill plug and set it aside in a safe place.
5. Get a funnel and position it in the fill plug hole.
6. Slowly pour the recommended type and amount of oil into the funnel. It is important to consult the owner's manual or contact the manufacturer for the correct type and amount of oil to use.
7. Once the oil level reaches the bottom of the fill plug hole, stop pouring oil.
8. Remove the funnel and wipe off any excess oil around the fill plug hole.
9. Carefully thread the fill plug back into place and tighten it securely with a wrench or socket.
10. Double-check that the fill plug is tight and securely in place.
11. Start the golf cart and let it run for a few minutes to allow the oil to circulate.
12. Turn off the golf cart and inspect the axle area for any signs of oil leaks.
13. If there are no leaks, the oil has been successfully added to the axle.

Remember to follow the manufacturer's instructions and specifications when adding oil to the axle of an EZGO TXT golf cart electric.