How to change replace chain on a razor electric motorcycle?

To change or replace the chain on a Razor electric Motorcycle, follow these steps:

1. Gather the necessary tools: You will need a wrench, socket set, and chain breaker tool.

2. Disconnect the power source: Ensure that the Motorcycle is powered off and the battery is disconnected to prevent any accidents.

3. Locate the chain cover: The chain cover is typically located on the rear wheel of the Motorcycle. Use the wrench or socket set to remove the bolts securing the chain cover in place.

4. Remove the old chain: Use the chain breaker tool to break the old chain and remove it from the Motorcycle. Be sure to take note of the chain's routing and any specific alignment.

5. Install the new chain: Position the new chain onto the sprockets, making sure it is aligned properly. Use the chain breaker tool to connect the new chain, ensuring that it is securely fastened.

6. Adjust the tension: Check the tension of the new chain by gently pressing down on it. It should have a slight amount of play but not be too loose. Use the adjustable rear wheel hub or tensioner provided on the Motorcycle to adjust the tension accordingly.

7. Reinstall the chain cover: Once the chain is properly installed and tensioned, reattach the chain cover using the wrench or socket set. Make sure all bolts are secure.

8. Reconnect the power source: Once everything is in place, reconnect the battery to restore power to the Motorcycle.

Remember, if you are unsure about any of these steps or if you encounter any difficulties, it's always a good idea to consult the manufacturer's manual or seek assistance from a qualified technician.