How to hook up lights on a electric golf cart?

To hook up lights on an Electric Golf Cart, you will need a few key components. First, you will need a Light kit that includes headlights, taillights, and wiring harnesses. You will also need a voltage converter to step down the voltage from the cart's batteries to the appropriate level for the lights.

Here is a step-by-step guide on how to hook up lights on an Electric Golf Cart:

1. Start by disconnecting the negative battery cable from the golf cart's battery pack.
2. Locate the wiring harnesses that came with your Light kit. These harnesses will connect the lights to the cart's electrical system.
3. Install the headlights and taillights in the designated mounting locations on the front and rear of the golf cart.
4. Connect the wiring harnesses to the headlights and taillights, following the instructions provided with the kit. Make sure to match the corresponding wires (e.g., red to red,GP-J3 | BLACK toGP-J3 | BLACK).
5. Route the wiring harnesses along the frame of the golf cart, securing them with zip ties or tape to keep them tidy and protected.
6. Connect the wiring harnesses to the voltage converter. The converter should have labeled terminals for input and output.
7. Connect the negative battery cable back to the golf cart's battery pack.
8. Test the lights by turning on the golf cart's power. If the lights do not turn on, double-check all connections and ensure the battery pack is charged.
9. Once the lights are working properly, secure any loose wiring with additional zip ties or tape.

It's always a good idea to consult your golf cart's owner's manual or seek assistance from a professional if you are unsure about any steps in the process.