How to loosen belt electric skateboard?

To loosen the belt on an electric Skateboard, follow these steps:

1. Turn off the electric Skateboard and disconnect the battery to ensure safety.
2. Locate the belt tension adjustment screws on the motor mount. These screws are usually located on the side or underside of the motor mount.
3. Using an appropriate tool, such as an Allen wrench, loosen the tension adjustment screws by turning them counterclockwise. This will loosen the belt.
4. Once the tension adjustment screws are loose enough, gently pull the belt away from the motor pulley. This will create slack in the belt.
5. Adjust the tension of the belt by tightening or loosening the tension adjustment screws as needed. Be careful not to overtighten as it may strain the motor or cause excessive wear on the belt.
6. After adjusting the belt tension, double-check that it is properly aligned with the motor pulley and the wheel pulley.
7. Reconnect the battery and test the Skateboard to ensure the belt is functioning correctly.

It's important to note that the specific method for loosening the belt may vary depending on the brand and model of your electric Skateboard. Always refer to the manufacturer's instructions or consult with a professional if you are unsure.