How to start electric start motorcycle after flooded engine?

To start an electric start Motorcycle after a flooded engine, you can follow these steps:

1. Turn off the engine and let it sit for a few minutes to allow excess fuel to evaporate.
2. Check the fuel tank and make sure there is enough fuel.
3. Turn the ignition key to the "off" position and remove it.
4. Locate the choke lever or button and make sure it is in the correct position for starting (usually in the "off" or "closed" position).
5. Set the throttle to the "closed" or idle position.
6. Press and hold the electric start button until the engine starts. If the engine doesn't start within a few seconds, release the button and wait for a few minutes before trying again.
7. Once the engine starts, let it idle for a few minutes to warm up before riding.

Remember, flooded engines can be caused by excessive fuel entering the combustion chamber, so it's essential to follow these steps to prevent any further damage. If the problem persists, it's recommended to consult a professional mechanic for assistance.