How to test continuity in forward and reverse switch on 1994 metalist electric golf cart?

To test continuity in the forward and reverse switch on a 1994 Metalist Electric Golf Cart, you will need a multimeter. Here are the steps to follow:

1. Make sure the golf cart is turned off and the key is removed from the ignition.
2. Locate the forward and reverse switch on the golf cart. It is usually located near the SHIFTER or on the control panel.
3. Set your multimeter to the continuity or resistance mode. This mode usually has a symbol that looks like a sound wave or an arrow pointing towards each other.
4. Take the two probes of the multimeter and touch them to the terminals on the forward and reverse switch. Make sure One probe is touching One terminal and the other probe is touching the other terminal.
5. If you hear a continuous beep or see a low resistance reading on the multimeter, it means there is continuity in the switch. This indicates that the switch is functioning correctly.
6. If you do not hear a beep or see a high resistance reading on the multimeter, it means there is no continuity in the switch. This indicates a problem with the switch and it may need to be replaced.

Remember to always refer to the specific instructions provided by the manufacturer for your golf cart model. If you are unsure about performing this test or if you suspect a more complex issue, it is best to consult a professional technician for assistance.