How to start electric start motorcycle after going down?

To start an electric start Motorcycle after going down, follow these steps:

1. Check for any visible damage or leaks: Before attempting to start the Motorcycle, inspect it for any signs of damage or leaks. If you notice any mechanical issues or fluid leaks, it's best to call for professional assistance.

2. Get the Motorcycle in an upright position: If the Motorcycle has fallen down, carefully lift it back into an upright position. If you need help, ask someone nearby for assistance.

3. Turn off the ignition: Before attempting to start the Motorcycle, ensure that the ignition is turned off. This allows the electrical system to reset and prevents any potential accidents.

4. Check the kill switch: Locate the kill switch, which is typically located near the handlebars. Check if it has been accidentally turned to the off position. Flip it back to the on position.

5. Turn the ignition on: Turn the ignition key to the on position. This will power up the electrical system of the Motorcycle.

6. Engage the clutch: Pull in the clutch lever, which is usually located on the left handlebar. Make sure it is fully engaged.

7. Hold the brake: Keep the brake lever pressed down to ensure the Motorcycle doesn't roll forward or backward.

8. Press the start button: Locate the start button, which is usually located on the right handlebar. Press and hold it until the engine starts.

9. Release the clutch: Slowly release the clutch lever while giving the Motorcycle a bit of throttle. This will engage the engine and allow the Motorcycle to move forward.

Remember, these steps may vary slightly depending on the make and model of your electric start Motorcycle. Always refer to the manufacturer's instructions and consult with a professional if you're unsure. Keep safety in mind while starting the Motorcycle and when riding.